Language CabriII vers. MS-Windows 1.01 English-USA // // Comments begin with // and end with a carriage return. // Use /\/ to get // into a string without starting a comment. // // Entries are terminated by carriage return followed immediately // by the [ character. // // The character & indicates underscore in menus. To get an // ampersand, use && . // // To get a carriage return into a string, use \r. // [1]Cabri Geometry II [2]The Interactive Geometry Notebook [3]By [4]Version [5.1] [5.2]For more information call 1-800/TI-CARES [6.1]ti-cares@ti.com [6.2]http:/\/www.ti.com/calc [6.3] [6.4] [7]Cabri Geometry II is a trademark of Universit* Joseph Fourier [8.0]Without units [8.1]Millimeter [8.2]Centimeter [8.3]Meter [8.4]Kilometer [8.5]Scaled length unit [8.6]Square Millimeter [8.7]Square Centimeter [8.8]Square Meter [8.9]Square Kilometer [8.10]Scaled area unit [8.11]Cubic Millimeter [8.12]Cubic Centimeter [8.13]Cubic Meter [8.14]Cubic Kilometer [8.15]Cubic length unit [8.16]Radian [8.17]Degree [8.18]Grad [9.1] [9.2] [9.3] [9.4] [9.5] [9.6] [9.7] [9.8] [9.9] [9.10] [9.11] [9.12] [9.13] [9.14] [9.15] [9.16] [9.17] [9.18] [10]this [11.1]On this line [11.2]On this ray [11.3]On this axis [11.4]On this segment [11.5]On this vector [11.6]On this triangle [11.7]On this polygon [11.8]On this circle [11.9]On this arc [11.10]On this locus [11.11]On this conic [11.12]At this point of the grid [12.1]By this point [12.2]By this point [13.1]from this point [13.2]to that point [14.1]This vertex point [14.2]By this vertex [14.3]By this vertex [15.1]This center point [15.2]This radius point [16.1]By this vertex [16.2]This arc point [16.3]By this point [17.1]Midpoint between this point [17.2]and this point [17.3]Midpoint of this segment [17.4]Midpoint of this vector [17.5]Midpoint of this side of the triangle [17.6]Midpoint of this side of the polygon [18.1]This point [18.2]This point [18.3]Perpendicular bisector of this segment [18.4]Perpendicular bisector of this vector [18.5]Perpendicular bisector of this side of the triangle [18.6]Perpendicular bisector of this side of the polygon [19.1]By this point [19.2]Parallel to this line [19.3]Parallel to this ray [19.4]Parallel to this axis [19.5]Parallel to this segment [19.6]Parallel to this vector [19.7]Parallel to this side of the triangle [19.8]Parallel to this side of the polygon [20.1]By this point [20.2]Perpendicular to this line [20.3]Perpendicular to this ray [20.4]Perpendicular to this axis [20.5]Perpendicular to this segment [20.6]Perpendicular to this vector [20.7]Perpendicular to this side of the triangle [20.8]Perpendicular to this side of the polygon [21.1]Translate this point [21.2]Translate this line [21.3]Translate this ray [21.4]Translate this segment [21.5]Translate this vector [21.6]Translate this triangle [21.7]Translate this polygon [21.8]Translate this circle [21.9]Translate this arc [21.10]Translate this conic [21.11]by this vector [22.1]Reflect this point [22.2]Reflect this line [22.3]Reflect this ray [22.4]Reflect this segment [22.5]Reflect this vector [22.6]Reflect this triangle [22.7]Reflect this polygon [22.8]Reflect this circle [22.9]Reflect this arc [22.10]Reflect this conic [22.11]with respect to this object [23.1]Rotate this point [23.2]Rotate this line [23.3]Rotate this ray [23.4]Rotate this segment [23.5]Rotate this vector [23.6]Rotate this triangle [23.7]Rotate this polygon [23.8]Rotate this circle [23.9]Rotate this arc [23.10]Rotate this conic [23.11]around this point [23.12]using this angle [24.1]Dilate this point [24.2]Dilate this line [24.3]Dilate this ray [24.4]Dilate this segment [24.5]Dilate this vector [24.6]Dilate this triangle [24.7]Dilate this polygon [24.8]Dilate this circle [24.9]Dilate this arc [24.10]Dilate this conic [24.11]with respect to this point [24.12]using this factor [25.1]Distance from this point [25.2]to that point [25.3]to that line [25.4]to that axis [25.5]to that circle [26.1]Length of this segment [26.2]Length of this vector [26.3]Circumference of this circle [26.4]Length of this arc [26.5]Perimeter of this triangle [26.6]Perimeter of this polygon [26.7]Circumference of this conic [26.8]Length of this conic arc [27.1]Coordinates of this point [27.2]Equation of this line [27.3]Equation of this circle [27.4]Equation of this conic [27.5]in this coordinate system [28]Tabulate this value [29]Edit this text [30]Edit this property text [31]Include this number [32]Which object? [33]Which object? [34]This name [35]Intersection of ... [36]Point on ... [37]Point at this intersection [38]Point on this object [39.1]This point [39.2]This segment [39.3]This vector [39.4]This triangle [39.5]This polygon [39.6]This regular polygon [39.7]This line [39.8]This ray [39.9]This circle [39.10]This arc [39.11]This conic [39.12]This coordinate system [39.13]This grid [39.14]This locus [39.15]This angle [39.16]This text [39.17]This number [39.18]This property [39.19]This equation [39.20]This table [39.21]This segment [39.22]This vector [39.23]This side of the triangle [39.24]This side of the polygon [39.25]This label [39.26]This envelop [39.27]This conic [39.28]This ellipse [39.29]This circular ellipse [39.30]This hyperbola [39.31]This rectangular hyperbola [39.32]This parabola [39.33]This mark [39.34]This measurement [39.35]These coordinates [39.36]This axis [39.37]These axes [39.38]This unit [40.1]Points are collinear [40.2]Points are not collinear [41.1]Objects are parallel [41.2]Objects are not parallel [42.1]Objects are perpendicular [42.2]Objects are not perpendicular [43.1]Points are equidistant [43.2]Points are not equidistant [44.1]This point lies on the object [44.2]This point does not lie on the object [45.1]Is this line [45.2]Is this ray [45.3]Is this axis [45.4]Is this segment [45.5]Is this vector [45.6]Is this side of the triangle [45.7]Is this side of the polygon [45.8]parallel to this line? [45.9]parallel to this ray? [45.10]parallel to this axis? [45.11]parallel to this segment? [45.12]parallel to this vector? [45.13]parallel to this side of the triangle? [45.14]parallel to this side of the polygon? [46.1]Is this line [46.2]Is this ray [46.3]Is this axis [46.4]Is this segment [46.5]Is this vector [46.6]Is this side of the triangle [46.7]Is this side of the polygon [46.8]perpendicular to this line? [46.9]perpendicular to this ray? [46.10]perpendicular to this axis? [46.11]perpendicular to this segment? [46.12]perpendicular to this vector? [46.13]perpendicular to this side of the triangle? [46.14]perpendicular to this side of the polygon? [47].,, [48]r [49]t [50]no "simple" polar equation [51]the line at infinity [52]The line at infinity (double) [53]An object created by a macro cannot be redefined. [54]This redefinition is not possible. [55]You cannot define a macro-construction without initial objects. [56]You cannot define a macro-construction without final objects. [57]You cannot define a macro-construction with the same object selected as both an initial and a final object. [58]This macro-definition is not consistent. Cabri cannot determine all final objects with the given initial objects. [59]A text object cannot be an initial or final object of a macro. [60]New construction [61]No help available for this macro. [62]A construction with same name already exists.\rChoose another name. [63]Do you want to keep the figure at this step? [64]Figure # [65]Toolbar [66.1]Not enough memory to save figure. [66.2]Not enough memory to read file. [67.1]The file " [67.2]" is not a valid Cabri-II file. [68]Could not open the file. [69]Could not create the file. [70]Could not write the file. [71.1]Save // [71.2] before closing? [72]Do you want to discard modifications? [73]Result: // [74]undefined [75]non-existent [76]unit [77]Unexpected character found in the string: [78]Unexpected character [79]An error was found when analyzing the calculation. [80]Units may not be compatible. [81]There is a division by zero. [82]Domain Error [83]Argument is greater than 1. [84]Argument is less than 1. [85]Non-integer power of a negative value. [86]Undefined power. [87]And will evaluate to zero. [88]And will evaluate to one. [89]Non-executable [90]Result has mixed units. [91]\rDo you want to convert angles to radians? [92]Result cannot be expressed in angle units. [93]\r(Variable angle values will be converted to radians) [94]The units in this calculation are incompatible! [95]Do you want to override? [96]Units are not acceptable in this case! [97]Units are not acceptable in this case! [98]Units are not acceptable in function [99](...)! [100]Subtracting very large values does not give any meaningful result. [101]Adding positive and negative very large values does not give any meaningful result. [102]There are too few right-parentheses. [103]Do you want Cabri to try to close them? [104]There are too many right-parentheses [105]There is not enough memory to undo! [106]Not enough memory to copy these objects. [107]Not enough memory to run. [108]is disabled in this demo version. [109]This is a demo version which is time limited to fifteen minutes.\rThis demo version is not for classroom use or resale.\r\rThe full version may be purchased from your instructional dealer. [110]DEMO TIME-OUT:\rYou can restart Cabri Geometry II for another fifteen-minute demo,\ror purchase a copy from your instructional dealer. [111]OK [112]NO [113]Cancel [114] and // [115]Discard [116]An error occurred!\r [117]parser err. [118]Cabri Help [119]Select, move, and manipulate objects. [120]Rotate an object around a selected point or its geometric center. [121]Expand or contract an object about a selected point or its geometric center. [122]Simultaneously rotate and dilate an object. [123]Create a point in unoccupied space, on an object, or at an intersection. [124]Create a point defined on an object. [125]Create a point at the intersection of two objects. [126]Construct an infinite line through a point at a specified slope, or through a second point. [127]Construct a line segment, defined by two endpoints. [128]Construct a ray, defined by an endpoint and direction. [129]Construct a vector with magnitude and direction defined by two endpoints. [130]Construct a triangle, defined by three points (vertices). [131]Construct an n-sided polygon. (Last point must also be the beginning point) [132]Construct a regular convex or star polygon with up to 30 sides, defined by a center point, a radius point, and a clockwise (convex) or counter-clockwise (star) motion to specify the number of sides. [133]Construct a circle defined by a center point and a specified radius. [134]Construct an arc defined by an initial endpoint, a radius point, and a final endpoint. [135]Construct a conic (ellipse, parabola or hyperbola) defined by five points. [136]Construct a line through a point and perpendicular to a line, segment, ray, vector, axis, or side of a polygon. [137]Construct a line through a point and parallel to a line, segment, ray, vector, axis, or side of a polygon. [138]Construct a midpoint of a segment, the side of a polygon, or between two points. [139]Construct a perpendicular line through the midpoint of a segment, the side of a polygon, or between two points. [140]Construct a line that bisects an angle specified by three points. [141]Construct the sum of two vectors from an endpoint that defines the resultant vector's tail. [142]Construct a circle from a centerpoint with radius defined by a segment or two points. [143]Construct a point that is equivalent to a selected measurement in distance or arc length. For distance, select the number and either a point, ray, axis or polygon. For arc length, select the number, a circle, and a point on the circle. [144]Automatically construct the set of objects defined by the movement of a point along a path. [145]Redefine the dependency characteristics of a previously defined object. [146]Construct the image of an object translated by a specified vector. [147]Construct the image of an object rotated around a point by a specified angular value. [148]Construct the image of an object dilated from a point by a specified factor. [149]Construct the image of an object reflected across a line, segment, ray, vector, axis, or side of a polygon. [150]Construct the image of an object rotated 180 deg. around a point. [151]Construct an inverse point defined by a point and a circle. [152]Specify the object(s) that define the final object(s). [153]Specify the final object(s) resulting from the definition of the initial object(s). [154]Open the dialog box for naming and saving a macro construction. [155]Report whether or not three points lie on the same line. [156]Report whether or not two lines, segments, rays, vectors, axes, or sides of a polygon are parallel. [157]Report whether or not two lines, segments, rays, vectors, axes, or sides of a polygon are perpendicular. [158]Report whether or not one point is equidistant from two other points. [159]Report whether or not a point lies on an object. [160]Display the distance, length, perimeter, circumference or arc length of a corresponding object. [161]Measure the area of polygons, circles, and ellipses. [162]Measure an angle defined by three points. [163]Measure the slope of a line, segment, ray, or vector. [164]Generate the coordinates of a point or the equation of a line, circle, or conic. [165]Generate the result of a mathematical expression; may contain numerical values and/or measurements. [166]Create a table to tabulate numerical values, measurements, calculations, or coordinates of a point. [167]Attach a user-created label to a point, line, or circle. [168]Place a comment at a selected location in the drawing. [169]Create and edit numerical values; the value, precision, units (CTRL-U) and color may be modified. [170]Place an angle mark on an angle defined by three points; the second point is the vertex. [171]Fix the location of a point. Free a fixed point. [172]Trace the path of a selected object as it moves. Trace toggles on or off. [173]Automatically translate, rotate, or dilate a selected object in a direction specified by pulling the animation spring in the opposite direction. [174]Animate multiple objects along multiple paths; press Return to start. [175]Hide objects on the drawing screen to reduce clutter. Show hidden objects. [176]Change the line thickness of an object. [177]Change the line pattern of an object. [178]Change the appearance of objects from the attribute palette. [179]Change the color of an object. [180]Fill the interior of the table, text fields, circles, or polygons with an opaque color. [181]Show the default axes for coordinate geometry. Hide the axes. [182]Create a set of axes defined by three points; the first point positions the origin, the second point positions the x-axis, and the third positions the y-axis. [183]Place a grid on a selected coordinate system. [184]This password is invalid, try again! [185.1](first constructed object) [185.2](last constructed object) [186]no other object [187]UNDO has been disabled. [188]Are you sure you want to delete the selected objects? [189]Are you sure you want to complete this redefinition? [190]Pointer [191]Rotate [192]Dilate [193]Rotate and Dilate [194]Animation [195]Multiple Animation [196]Trace On/Off [197]Fix / Free [198]Point [199]Point on Object [200]Intersection Points [201]Line [202]Segment [203]Ray [204]Vector [205]Triangle [206]Polygon [207.1]Regular Polygon [207.2]Regular Polygon Vertex [208]Circle [209]Arc [210]Conic [211]Perpendicular Line [212]Parallel Line [213]Midpoint [214]Perpendicular Bisector [215]Angle Bisector [216]Vector Sum [217]Compass [218]Measurement Transfer [219]Locus [220]Redefine Object [221]Translation [222]Reflection [223]Symmetry [224]Rotation [225]Dilation [226]Inverse [227]Initial Objects [228]Final Objects [229]Define Macro [230]Collinear [231]Parallel [232]Perpendicular [233]Equidistant [234]Member [235]Distance and Length [236]Area [237]Slope [238]Angle [239]Equation and Coordinates [240]Calculate [241]Tabulate [242]Label [243]Comments [244]Numerical Edit [245]Mark Angle [246]Hide/Show [247]Thick [248]Dotted [249]Modify Appearance [250]Color [251]Fill [252]Show Axes [253]New Axes [254]Define Grid [255]Show Axes [256]Hide Axes [257]Transfer to another object [258.1]&File [258.2]&New [258.3]&Open... [258.4]&Close [258.5]&Save [258.6]Save &As... [258.7]&Revert... [258.8]S&how Page... [258.9]Page Set&up... [258.10]&Print... [258.11]E&xit [259.1]&Edit [259.2]&Undo [259.3]Cu&t [259.4]&Copy [259.5]&Paste [259.6]C&lear [259.7]&Select All [259.8]R&eplay Construction [259.9]Refresh &Drawing [260.1]&Options [260.2]&Show Attributes [260.3]&Preferences... [260.4]&Tool Configuration... [260.5]&Language... [260.6]&Font... [261.1]&Window [261.2]&Cascade [261.3]Tile &Horizontally [261.4]&Tile Vertically [261.5]Close Al&l [262.1]&Help [262.2]&Help [262.3]&About Cabri II [263.1]&Show Attributes [263.2]&Hide Attributes [264.1]&Redo [264.2]&Undo [265]System Font [266]&Close [267]Factory Settings [268]Save to file [269]Save to file and [270]Apply to [271]New Objects [272]Selection [273]&Keep as defaults [274]Choose an icon [275]Print Region Selection [276]Show Page [277.1]You can move the [277.2]anywhere within the one square meter limits of the drawing. [277.3]page outline [277.4]screen outline [278]Press OK to print now. [279]Replay Construction [280]Password [281]Enter password to access Tool Configuration. [282]Tool Configuration [283]Password (optional)\r(up to 8 characters): [284]Select and move items you want to change. [285]Preferences [286]Display Precision and Units [287]Number of decimal places [288]Default Units [289.1]Length [289.2]0 [289.3]1 [289.4]2 [289.5]3 [289.6]4 [289.7]Maximal [290.1]Angle [290.2]0 [290.3]1 [290.4]2 [290.5]3 [290.6]4 [290.7]Maximal [291.1]Other [291.2]0 [291.3]1 [291.4]2 [291.5]3 [291.6]4 [291.7]Maximal [292.1]Millimeter (mm) [292.2]Centimeter (cm) [292.3]Meter (m) [292.4]Kilometer (km) [292.5]Degree (¢X) [292.6]Grad (gr) [292.7]Radian (rad) [293]Loci Options [294]Number of objects in locus: [295]Locus of points: [296]Link points [297]Locus of lines: [298]Envelope [299]Coordinate System and Equations [300.0]Coordinate System [300.1]Cartesian [300.2]Polar (¢X) [300.3]Polar (gr) [300.4]Polar (rad) [301.0]Line [301.1]ax+by+c=0 [301.2]y=ax+b [302.0]Circle [302.1]x^2+y^2+ax+by+c=0 [302.2](x-a)^2+(y-b)^2=R^2 [303.0]Conic [303.1]ax^2+bxy+cy^2+dx+ey+f=0 [303.2](x-xo)^2/a^2+(y-yo)^2/b^2=1 [304]System Options [305]Bitmap Copy [306]Disable Undo [307]Use only system colors [308]Tolerance [309]Cursor Font [310]Menu Font [311]Geometry [312]Implicitly defined points [313]Objects at infinity [314]Default Styles [315.1]Comments [315.2]Labels [315.3]Numbers [315.4]Lengths [315.5]Areas [315.6]Angles [315.7]Equations [316.1]Points [316.2]Lines [316.3]Polygons [316.4]Vectors [316.5]Circles and Conics [316.6]Arcs [316.7]Axes [316.8]Grid Marks [316.9]Loci [316.10]Angle Marks [317.0]Calculator [317.1]= [317.2]Off [317.3]Clear [317.4]inv [317.5]sin [317.6]cos [317.7]tan [317.8]sqrt [317.9]^ [317.10]ln [317.11]log [317.12]abs [317.13]pi [317.14]( [317.15]) [317.16]+ [317.17]- [317.18]x [317.19]/ [317.20]= [318]Define Macro [319]Example [320]Erase [321]Name of the construction: [322]Name for first final object: [323]Help for this macro: [324]Augment or replace a macro definition [325]&Augment [326]&Replace [327]A macro-construction with the same name already exists.\rDo you want to augment its definition or replace it? [328]Print the file &name [329]Print the &date [330]Open a File [331]Save File As [332]Save Preferences File As [333]Open a Language File [334.1]Figure Files (*.FIG) [334.2]Macro Files (*.MAC) [334.3]Menu Files (*.MEN) [334.4]TI-92 Files (*.92A) [334.5]Text Files (*.TXT) [334.6]Preferences Files (*.INI) [334.7]Language Files (*.CGL) [334.8]All Files (*.*) [335.1]Ctrl [335.2]Del [336]There are too many figure windows open.\rClose a window. [337]Do you want Cabri II to start with US English next time?